Time to Modify Just a Bit More.......

[excess.11]

Interesting frame colour. Is it the final scheme?....or undercoat?
It s hard to believe ...that these seemingly innocent titbit pics of parts....once assembled ...will propel you through space at near "Warp speed".
I feel this reincarnation deserves a new name once this surgery is complete.

[AussiXS11G]

painting......



on the down side...... my loom

[excess.11]

Looking good Bryan...just in time for the Rally....
Next year!!
Hahaha
Now...if Tim could pull his finger out and stop Dickin around...he may be ready as well.

[AussiXS11G]

Thanks excess.11......

things are getting ready to happen in my workshop......I have amassed about everything.....painting the frame tomorrow and Saturday, then it's assembly time.

[excess.11]

Don t forget to put the caps in the ends of the camshafts .......

[steptoe]

by the looks of that, the cam lobes must 110 degrees from a point on the engine somewhere, with the valves open 50 thousands of an inch to aleviat the possibility of the valves and pistons hitting

btw thats a very pretty engine

[AussiXS11G]

dialling........more to it than lining up the dots

[SCARFEY]

Camshafts dialled to 110 at 50thou.....as Pauline Hansen says....Please explain

[Jonesy :-)]

mmm, shiny. me like

[AussiXS11G]

Today's efforts - complete motor..... Camshafts dialled to 110 at 50thou.







Now - about that frame....



more pics here...
http://s578.photobucket.com/user/aussixs11G/library/XS1100%20latest%20evolution%20-%202016?sort=3&page=1

[Jonesy :-)]

Back wheel looks to be in the spot on right position and not frankenstined like some other chain drive conversions
Progressing nicely, is wheel polishing on  the list?

[excess.11]

Have you pulled the filament out of the headlight globe and tugged on it to make sure it s still in one piece ?
Aha...there....I didn t think so !!!!
Hahaha...very very thorough work !

[AussiXS11G]

carbs done earlier matey......in readiness.....

[excess.11]

Very very disappointed with you Bryan.....why have you not pulled the carbys down to every last screw and nut ?(everyting else has been!))
You know.... they will be the one thing that will fail you when you have completely reassembled this bike.
Jus sayin.....
Ohh..and can you put some discs on that front wheel....it looks rather naked. A cafe racers delight !!

[AussiXS11G]

been busy today......
tried the tank and seat on the frame - the handlebar misses the tank, bugger all lock to lock


then this afternoon, turned this....


into this......should be all together tomorrow



more here
http://s578.photobucket.com/user/aussixs11G/library/XS1100%20latest%20evolution%20-%202016?sort=3&page=1