TCI

[maark25]

Yes. Fortunately I had a spare fixed one. Now it's back to how it should have been 👍

[XSIIE]

Did you change back the timing plate to the 4RO fixed one?
Or do you still have the one with the centrifugal mechanical advance with slots?

[maark25]

not yet..just swaped it over this afternoon..will have a look in next few days

[Jonesy :-)]

Did you do an ortopsy on the tci that was running bad?

[maark25]

so i got hold of another TCI and its back running smoothly..
Just lucked out,found a guy on gumtree. Even got the 4R0 10 model that was meant to be on my bike. previous owner had converted it to the older ignition setup..
As a bonus i also scored 2 side covers in perfect condition

[Jonesy :-)]

I,ve had one burn out one of the tracks on the printed circuit board, soldered in a new wire to simulate the track and all good.
Open it up and have a look for something obvious like I had. Also check for dry? (Is that the terminology?) Or dodgy solder joints. From memory 30+ years ago mine ran but very poorly maybe on 2 like yours

[makzy]

Don’t take this as gospel but my experience with TCI box failure has been immediate and nothing, zilch, zero. Two of them, there is supposed to be a bloke in Townsville that can fix them but very expensive, if someone can lend you a box to see if that fixes it Then you know where your going.

[maark25]

Hi all
After much head scratching..i have finally worked out my tci is cactus..tested pulse coils,installed new coils,leeds,plugs etc..bike runs on 2 cyclinders..only spark on 2..I have searched but no luck for a replacement..Are these fixable?
Or does anyone have a spare they would be willing to sell me?
It was working initially,then intermittently.
Its 2h7-10 model..

regards mark