Left handlebar switchblock

[Jonesy :-)]

All good, soldered the broken wires and blinkers are a blink'n.........for now

[XSIIE]

Or you can use your existing plugs and splice them into the new wirea

[Jonesy :-)]

Thanks Jeff
I'll be ordering one of those pin removal sets and an XS 650 switch block if my soldering fails

[excess.11]

Brown/wht - centre contact- To flasher relay
Dark grn- left indicator
Chocolate - right indicator
Pins can be removed from xs650 switch connector and reinserted into xs1100 connector using ...
https://www.ebay.com.au/itm/18Pcs-kit-Terminal-Removal-Tool-Car-Plug-Circuit-Wire-Extractor-Pin-Connector/332961597684?epid=14024346012&hash=item4d860ec8f4:g:RrMAAOSws2RcGJVT:rk:3:pf:0

The 5 separate wires with bullet connectors can be cut off and joined inline to the xs1100 connectors using solder/heatshrink or the correct sized insulated inline indent connectors.
XS650 SWITCHBLOCK.

[Jonesy :-)]

Thank Eddy
Thought it wouldve been too easy for it to have slipped straight in.
I've since stripped the switch to the nth degree and going to have a crack at resoldering.
Alli need to know now is which colour wire goes where?

[XSIIE]

Plugs are different

[Jonesy :-)]

The  Rooted Handlebar switch problem child blinkers have stopped working, sussed out that 2 wires have become unsoldered from there terminals and probably not repairable (by me anyway) someone has previously been in here and soldered the same 2 wire so wires are all stiff with blobby bits of solder remaining. So my question is, will an xs 650 switchblock fit straight in? GeoffsXS  has some new ones but photo on the website doesnt show the connectors to good