« previous next »
Pages: 1   Go Down

Author Topic: DYNA COILS  (Read 1753 times)

0 Members and 1 Guest are viewing this topic.

Offline XSIIE

  • Hero Member
  • *****
  • Posts: 963
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and email me your postal details so I can send you our group stickers etc.
Re: DYNA COILS
« Reply #5 on: April 22, 2012, 05:36:03 PM »
Dyna Coils went in today.  Had a couple of problems fitting the brackets, Use the frame on the 81 as a mock up and then transferred the units to the 78.  the difference in the hole alignment was around 10mm.  Fixed it by drilling bigger holes in the brackets.

Before Dyna Coils bike had problems idling and would not rev smoothly.

After Dyna Coils.  WOW.    ;D  no more spluttering and smooth through the rev range.

A Highly recommended mod
 
Also replaced the fuse box with one of those pommy after market numbers.

Getting excited about Bourke.

Eddy
78 Standard (going to Bourke)
81 RH Daily Ride
81 Standard (completely pulled down)
81 RH Doner
Logged
"If we do what we always do then
we will never be more than we are"
Poh (Kungfoo Panda).
78E x 2
78E DJP Chair
80G (current project)
81H
81RH x 4
82P x 2

Offline XSIIE

  • Hero Member
  • *****
  • Posts: 963
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and email me your postal details so I can send you our group stickers etc.
Re: DYNA COILS
« Reply #4 on: April 16, 2012, 09:29:13 AM »
Thanks Bryan,

Dyna coils going in next weekend.  With stickers.

Eddy
Logged
"If we do what we always do then
we will never be more than we are"
Poh (Kungfoo Panda).
78E x 2
78E DJP Chair
80G (current project)
81H
81RH x 4
82P x 2

Offline AussiXS11G

  • Administrator
  • Hero Member
  • *****
  • Posts: 1452
  • Gender: Male
  • mmmmmm XS1100
Re: DYNA COILS
« Reply #3 on: April 16, 2012, 08:49:34 AM »
Logged
Bryan
Mobile 0404 540 617
1998 Laverda 750S
1984 Laverda RGS 1000
1980 Yamaha XS11
1980 XS1100 outfit
http://s578.photobucket.com/home/aussixs11G/allalbums
http://www.youtube.com/results?search_query=aussixs11g&aq=f

Offline excess.11

  • Jeff
  • Hero Member
  • *****
  • Posts: 1873
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and PM me your postal details so I can send you our group stickers etc.
Re: DYNA COILS
« Reply #2 on: April 16, 2012, 08:31:33 AM »
Eddy , aside from removing the resistor located on the frame under the left front side of the tank and bridging out the 2 wires..........go for it.




There have been many happy customers and  good reports after fitting the Dynacoils.
« Last Edit: April 16, 2012, 09:32:20 AM by excess.11 »
Logged

Offline XSIIE

  • Hero Member
  • *****
  • Posts: 963
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and email me your postal details so I can send you our group stickers etc.
DYNA COILS
« Reply #1 on: April 16, 2012, 06:47:11 AM »
Hi folks,

Has anyone fitted the 3 ohm Dyna Coils to their XS11's?

My plan is to fit them to the 78 Standard before Bourke.

Any tips?

Cheers

Eddy
Logged
"If we do what we always do then
we will never be more than we are"
Poh (Kungfoo Panda).
78E x 2
78E DJP Chair
80G (current project)
81H
81RH x 4
82P x 2
Pages: 1   Go Up
« previous next »