rear wheel "CLICK"

[steptoe]

just found the invoice,, part # N9-226
                                         #N9-223

[melbxs]

                              3.5 x 40.7

                              3.1 x 58.4

                                             
what else do you need

from your local CBC / SKF shop,, they don't have the piont 1 or 4, not that it would matter that much,, I ordered 3.5, and 3mm, might even go back and get both 3.5

Steptoe

Do you have part numbers for these. My SKF shop were struggling to match those sizes (I asked for them both in 3.5mm)

[steptoe]

having replaced the o-rings and having done the axle up to proper torque

the old girl is a completely different bike to ride,{waited for a couple of weeks of riding to make sure} as smooth as the day I bought it, no buzz in the bars, no vibs any where

            AND NO CLICKS

only 1 thought, maybe the spacer that sits behind the LHS seal was moving on the bearing face, making some of the "click", cause now the jobs done it is near impossible to get it to click doing the "steptoe" twist

I have a spare set of o- rings if any one wants


1 thing I did end up doing was get 3.5 section on both rings,, can never have enough "buffer"

[steptoe]

the last bit of the job

[XSokieSPECIAL]

          I HAVE FOUND IT & AND FIXED IT   

   am so pleased with myself at the moment,, I could fart 

           

it's a bit long but I wanted to get some detail into it,, the other clicking is the elelctric fence

 Hey bro'! I have a friend here, in Texas, that is having a similar problem.

 I sent him the link to your video. I'll let y'all know if it is what he is expeiencing.

 Thanks for taking the time to make the video and sharing. That's what it's all about.

[steptoe]

          THAT
is feed back I WANT to hear 









                               I hope 

[melbxs]

                              3.5 x 40.7

                              3.1 x 58.4

                                             
what else do you need

from your local CBC / SKF shop,, they don't have the piont 1 or 4, not that it would matter that much,, I ordered 3.5, and 3mm, might even go back and get both 3.5

OK legend it is.

I had my bike on the centrestand and gave the wheel the Steptoe twist. I have the exact same click as you, so looking forward to getting some new O-rings in there and see if the minimal vibration I had disappears.

[steptoe]

                              3.5 x 40.7

                              3.1 x 58.4

                                             
what else do you need

from your local CBC / SKF shop,, they don't have the piont 1 or 4, not that it would matter that much,, I ordered 3.5, and 3mm, might even go back and get both 3.5

[melbxs]

Geoff

to earn true legend status you have to tell us what size of O-rings they are so we can buy them BEFORE we take the wheel off.

 

[AussiXS11G]

yeh .... true.... i had my rear wheel apart abt 40k km ago (new bearings, o rings) and have just had it apart as part of the itallic wheel swap now ..... that large o ring is somewhat flattened
but still thick enough to provide a cushion .....
the itallics have new everything so we will see (hear) what happens ....
i'm picking up the wheels on Friday with new rubber ready to roll ...
didnt get to do the front brake conversion at this time tho
on weekend will check valve clearences, balance carbs, new fuel lines/filters
and ready for Eastern Creek 

[steptoe]

the o-ring might not be missing but would think certainly badly worn,

can only go off mine of course, but the purchase of said rings, for the princly sum of a couple of dollars,, might take a wieght off a few shoulders

 not from yamaha,, but your local bearing service shop

[AussiXS11G]

Geoff mate...
is it true then that all those guys with the "clixk" did not have the bigger
O ring fitted ? 

[excess.11]

John,you do know we always like pics and a vid to help  explain things .............

[steptoe]

are we still talking about knee pads for the shed John, ,,

 are have we moved elsewhere

[bluedayt]

They have many uses, just ask my misses.......