« previous next »
Pages: 1   Go Down

Author Topic: Head cover gasket for the RH  (Read 981 times)

0 Members and 1 Guest are viewing this topic.

Offline Eveready1100

  • Have Bike, Will Ride.
  • Hero Member
  • *****
  • Posts: 1822
  • Gender: Male
  • Childers , QLD
Re: Head cover gasket for the RH
« Reply #2 on: September 21, 2010, 08:16:21 PM »
Mate, by far the cheapest way is to go to the UK site and download the full size template for the gasket then transfer onto some gasket paper. A hole punch to knock the holes through before cutting out the pattern then a sharp trimming knife or scissors to cut the shape out. Just take your time, and all should be well.
Here's a link to get you started - CLICK
Logged
Errol
1979 XS1100 SF Special
1978 XS1100E Donor
"I know stuff about stuff."

Offline Carsten

  • Full Member
  • ***
  • Posts: 89
  • Welcome to the group. Now let us know a bit about you in General Discussions
Head cover gasket for the RH
« Reply #1 on: September 21, 2010, 05:19:04 PM »
Hi all.  The silicone substitute for head cover gasket doesnt seem to work to well on the RH, leaking oil on to the exhaust header and smoking the garage out.  Whilst still trying to source a taillight, will have to put a real gasket in.  What is the best, cheapest way to buy a gasket?
Thanks
Carsten
Logged
Pages: 1   Go Up
« previous next »