Needle Roller Bearing

[rhodie55]

Yep, it's amoungst that lot!! How do the rollers look....mine are pitted and scoured hence the plea for help.. Good onya!

[melbxs]

Is this the one? Second picture.

http://cgi.ebay.com/ebaymotors/79-YAMAHA-XS1100-XS-1100-MIDDLE-DRIVE-GEAR-_W0QQcmdZViewItemQQhashZitem19ba3a1e13QQitemZ110498553363QQptZMotorcyclesQ5fPartsQ5fAccessories#ht_1642wt_939

[melbxs]

Rhodie

Is there one in amongst this lot?

Cheap, but postage will be horrid unless you get him to separate out the important bit.

http://cgi.ebay.com/ebaymotors/1978-YAMAHA-XS-1100-TRANSMISSION-GEAR-LOT-YAMAHA-XS1100-_W0QQcmdZViewItemQQhashZitem53e29f0fccQQitemZ360284360652QQptZMotorcyclesQ5fPartsQ5fAccessories

[rhodie55]

Steptoe,
 
Bearing sizes as follows:- od = 33mm; id = 20mm (rollers contact directly onto shaft - no inner race); length = 20.5 with a large chamfer 5.5mm x 30 deg one end and circlip 1.7mm wide x 0.55mm deep opposite end.

Hope this makes sense, extremely difficult to up load a photo!! Please tell me you got one!!

Cheers mate.

[steptoe]

will dig it out in anticipation 

[rhodie55]

G'day Steptoe,

You're a legend mate! That's the one. Mine has a full retaining clip, but that's not serious as I'll just use my existing one. I'll measure up the bearing this weekend, just to make sure we're on the same page. I'll also try and include a photo.

Cheers, rhodie55

[steptoe]

is that the one that has a bevel end and a securing half clip,,,,,, bout 1 inch across?

cuase I do have one if that's it

[rhodie55]

Hi All,

I'm looking for the special needle roller bearing on the 2nd gear main shaft cluster. CMSNL part number 9331152031 - item 12 on the Transmission fiche.

Does anyone have a spare or know where I can get one....pleeeaase heelll..pp.

Thanks,