RH ReHab

[Jonesy :-)]

Makzy, nothing dodgy with the blue bucket thing, its my parts cleaner.
Blue 60 litre bucket full of diesel with a 12 volt bilge pump from bcf the top is the butt cut off a blue plastic 200ltr drum

[AussiXS11G]

I did think the wheels - you've lined the shed?
nice

[Jonesy :-)]

Feast your eyes Jeff
And 10 points to Errol

[excess.11]

I miss the sansui and the vistas.

[hen]

What I’m curious about is what’s with the blue bucket arrangement with all the tubes going in and out? Looks a bit suss to me, not that I would know anything about suspicious items. 

Yes 

[Eveready1100]

 Lucrezia DNA?

I'd say that'd have to be the black swirly wheels?

[makzy]

What I’m curious about is what’s with the blue bucket arrangement with all the tubes going in and out? Looks a bit suss to me, not that I would know anything about suspicious items. 

[hen]

Great

[Jonesy :-)]

Damn close, its the higher grade slightly thicker qualities of a 43 grade Coffee Tin 

EDIT did you pick the lucrezia DNA?

[AussiXS11G]

very nice work, Paul
I'm guessing CT = Coke Tin

[excess.11]

I m willing to have a crack....CT Steel.....Cold Tapped ?!

[steptoe]

I,m dumb enough to ask,,,,,, whats the "CT steel" ??

[Jonesy :-)]

while the cases were split I discovered the little locating pin on the selector shaft was virtually flush with the shaft and very likely to let the whole thing move, worst case scenario turn and allow the cutaway that clears one of the gears by a whisker to come in contact and do some pretty catastrophic damage. quick fix to drill out what remained and tap in a new roll pin. crap photo but you get the idea


Cases assembled with new primary chain, new crank and output shaft seals all new ball bearings and crankshaft plain bearings, top half with 3 bond sealer on mating faces ready to receive bottom case


All 6 motor mounts got the CT Steel shouldered re-sleeve treatment, shoulder to prevent working its way out.



Short motor installed ready to build, heaps lighter for a weakling like me to install without a helper




Front end work includes, new fork seals, chrome chips wet stoned smooth to hopefully stop chewing out more seals, fresh oil and 8psi air, some lucrezia DNA, adjusted head stem bearings, and because RH's arent black enough I added some super black fork gaitors.......still waiting for front brake pads


Back end work includes, more lucrezia DNA, swingarm stripped & painted (the only cosmetic work on this build besides cleaning and degreasing) repacked and adjusted swing arm bearings, wheel, final drive and drive shaft splines all cleaned inspected (OK) and fresh grease,new EBC FA34 brake pads and unijoint rubber boot

[Jonesy :-)]

Sorry to be the bearer of bad news mate.........they wont fit
I wonder who pulled the cunning stunt and donated them to the auction?
Probly wouldnt matter to a bloke that paid $4,000 for a coffee mug 

[hen]

mine are wait for it



FDB277p same as yours still in package measures 10mm aprox each so 20 mm

would you like to buy them
so these wont fit true or false