As much help as possible required!!!
78E Pulled the carbs apart, sprayed cleaner everywhere. Pulled the diaphragm apart and found number 1 carb the jet needle I pushed up as the other 3 I pulled the jet needles down. Reversed the spring on number 1 and now the jet needle pulls down. Put everything back together making sure the the rubber boots seals. Bench synced the carbs as best as i could. Installed back on the bike, twist the throttle to make sure nothing was jamming. Hit the starter button and bike fires up but revs at 7000rpm, Push the choke in, no change, screw the idle adjustment knob, no change. Just revs it's guts out.
Where do i start to find the problem?
