Can't find fuel sender wires...?

[Raf-1200]

You are right. Thanks excess. Those pics were taken of my other wiring loom. Unless the green and black wires are well and truly hidden up in the loom housing it would seem they don't exist on my current loom. Where there some xs1100's that came out without fuel sender units? Or do I have to dig deeper lol

[excess.11]

Raf...we ve already discussed this with reference to the pic .......
Under the topic...."Need help with the wiring loom"  you posted.

http://xs1100.com.au/forum/index.php?topic=2288.msg15242#msg15242

Quote from: excess.11 on March 08, 2014, 07:56:41 AM

Gotta agree Raf...........your problems would be better solved in the manner you wish....however
as with any fault finding issues.........electrical or mechanical..............break it down to individual basics and proceed one step at a time .
The top pic  I believe shows the wiring from the main loom to connect to the fuel gauge sensor mounted in the tunnel of the fuel tank.
I don t trust colors on pics as they may be faded cabling or washed out by a flash or not well lit . The location on the main loom seems to indicate the purpose of the cables.
The wiring within the main loom should be as per schematic but I would nt trust cabling colors from auxillary item.such as the flasher can or switcblocks as they may be aftermarket.
I ll need to see a pic of your flasher canister to see if you have the original . If you wish to restore the self cancelling function you will need this one ........if not.........you can manually cancel using other flasher cans.
Do you have a wiring schematic ?
To save us guessing.....show a more detailed pic and describe the particular section/part and what you need to know.
Is the wiring from the left switchblock missing wiring connector blocks or is it plugged in ? What state are the indicators in ?.............are you using the original filament globes or installing LEDS ?

Link to wiring loom connector kit........

http://xs1100.com.au/forum/index.php?topic=1975.msg12807#msg12807

[Raf-1200]

Who can tell me what colour wires and where exactly they are supposed to leave the harness for the fuel sender unit? I know they used to be there but while I was building the bike I realised they were only twisted together. I had planned on soldering them in. Now I can't even see where they used to be.
Xs1100 1979.

Cheers
Raf