rear wheel drive side spacer

[pgnz]

G'day, just wondering if anyone  can spare one of the spacers from the drive side rear wheel bearing (fitted inside the seal) an old seal for a sample would be handy too ( or measurements, can't remember if that seal is genuine only or not ).
 also would like the plastic cover and screws for the drive side rear wheel, let me know what you want for them , thanks, Clutch.

Can do  you those bits,  spacer, seal,  plastic rim and screws for $40 Aus  posted     cheers PG

[makzy]

I'll ask my brother tomoro, he may have one, think 750's are the same, i'll get back to you..

[steptoe]

the good news is I do have a spacer,, the bad, I would have to wreck the seals to get it out of my outfit wheel,, sorry

BUT I do have sizes,, the spacer,, 10 mm deep, {INCLUSIVE OF SHOULDER} id is 20mm,, od of 26mm, with a shoulder 30mm across and 3 or 4mm deep

the seal is a 26 x 38 x 7

the right side seal {brake disc} 27 x 52 x 5

hope that helps

[Clutch]

thanks mate, 
 can anyone measure up the spacer and post dimensions so I can have one made ?
 Clutch

[steptoe]

ay clutch,, don't have a spacer,, but the seals can be bought at your local SKF or CBC shop,, 3 times cheaper than orig ,, will look and post morrow  eve as to sizes

[Clutch]

G'day, just wondering if anyone  can spare one of the spacers from the drive side rear wheel bearing (fitted inside the seal) an old seal for a sample would be handy too ( or measurements, can't remember if that seal is genuine only or not ).
 also would like the plastic cover and screws for the drive side rear wheel, let me know what you want for them , thanks, Clutch.