front brake m/cyl

[steptoe]

if you keep re-prioritising my w/shop list mate,   I'll never get the "old" jobs done 

[melbxs]

The FJR1300 front master has the Yamaha mirror mount. They use the bluespot brakes on the FJR, so not sure if bore is same as XS1100.

Pricier than the MikesXS stuff, but a very solid looking piece of kit.

LINK TO EBAY ITEM

You could also get the clutch MC and lever and do that hydraulic clutch mod you always wanted. 

ANOTHER EBAY LINK

[Stout]

^^ That sounds like a pretty good option.

My second hand FJ11 one cost $75 from the local wrecker. Also, Jonesy's mention of the mirror mount reminded me that I also then had to spend $25 on a mirror, because the original XS master had a LH thread for the mirror, whereas Yamaha apparently ditched this idea on the FJ and went to a normal RH thread.

[Cueball]

MikesXS.com twin disc master cylinder with brake light switch $76 US. Have dealt with them in past, five days delivery from Florida to Lavington. About $35 US for shipping via USPS. All up less than cost of new M/C in Aust.

[steptoe]

don't beat yourself up to hard, all ideas are accepted here,,

[Jonesy]

Hey Geoff

Stouts option sounds pretty good, 4 wheeler option doesnt have mirror mount or brake light s/w...best just keep my dumb suggestions to myself ay.

[Stout]

Geoff, I'm running the master cylinder off an FJ11 on mine. Same handlebar size and same 5/8" cylinder bore - even has 'Yamaha' across the top and the lever doesn't look out of place opposite the original clutch lever. You need to get the lever with it as the bit that actuates the switch is different from the original. For that matter, make sure you get one with the switch in it too...

I just clipped off the old switch (kept it though...) and crimped on two small spade connectors as that is what is used on the FJ.

[steptoe]

can you put a pic up,, if it's got yamaha across the top cap should be good

[Jonesy]

Hey Geoff, does it have to be original XS?  Maybe you could widen your search criteria?
 I just noticed my Yamaha 4 wheel farm bike has a master cylinder(handlebar clamp and resovoir as one piece) that would probably fit too. Its a bit gimmicky though, got one of them fancy doo dah site glasses to check fuid leve
lJonesy.

[steptoe]

can any one help me with pro-curing a front master cylinder, complete with brake switch if possible for my MNS

am starting to have troubles with my "will have to do till I can get one", only been 4 yrs