Author Topic: model id for new project  (Read 837 times)

0 Members and 1 Guest are viewing this topic.

Offline XSIIE

  • Hero Member
  • *****
  • Posts: 963
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and email me your postal details so I can send you our group stickers etc.
Re: model id for new project
« Reply #2 on: July 25, 2016, 08:51:06 PM »
Hi Dave,

All parts interchange from the 78 - 81 Standard model save a few model specific parts.

There are subtle differences in the models, for example 78 and 79 have a kick starter the 80 -81 model does not.

If you have any specific questions on parts I have the 78, 79 and 80/81 parts numbers books.

Eddy.
78E (2H9) (sunny Sundays)
78E (2H9) with DJP (kids and dogs transport)
81RH (5N5) (commuter)
81RH (5N5) (barn find project)
81H (3X1) (Project 3131)
82P (5H4) (Future Project)
"If we do what we always do then
we will never be more than we are"
Poh (Kungfoo Panda).
78E x 2
78E DJP Chair
80G (current project)
81H
81RH x 4
82P x 2

Offline dave

  • Davee
  • Jr. Member
  • **
  • Posts: 12
  • Gender: Male
  • Welcome to XS1100 Australia. Now let us know a bit about you in General Discussions and email me your postal details so I can send you our group stickers etc.
model id for new project
« Reply #1 on: July 25, 2016, 06:56:30 PM »
hi guys
I have found an 80 model i am looking at and the numbers start in 3x1 which checks out on my list as a Aussie delivered bike.
Will the parts be interchangeable with my 78 model 2h9 Aussie delivered.
Any differences or advice would be appreciated.
Ride safe guys
Dave