« previous next »
Pages: 1   Go Down

Author Topic: Need valves pls  (Read 1610 times)

0 Members and 1 Guest are viewing this topic.

Offline HMC

  • Ethics Chairman
  • Full Member
  • ***
  • Posts: 78
  • Gender: Male
Re: Need valves pls
« Reply #9 on: August 26, 2013, 03:31:56 PM »
Thanks Scarfey     I got three from the states for $50 each and the final inlet from the Yamaha dealer for $80. Good to learn of BK Performance for next time. Rgds
Logged
Sonium et sonium
79XSF 
R1100GS  
WR450
Kawa 65ZV2

Offline AussiXS11G

  • Administrator
  • Hero Member
  • *****
  • Posts: 1453
  • Gender: Male
  • mmmmmm XS1100
Re: Need valves pls
« Reply #8 on: August 22, 2013, 04:11:59 PM »
I heard that the hot setup are FJ1200 valves - bigger apparently -  ;)
Logged
Bryan
Mobile 0404 540 617
1998 Laverda 750S
1984 Laverda RGS 1000
1980 Yamaha XS11
1980 XS1100 outfit
http://s578.photobucket.com/home/aussixs11G/allalbums
http://www.youtube.com/results?search_query=aussixs11g&aq=f

Offline SCARFEY

  • Hero Member
  • *****
  • Posts: 480
  • Gender: Male
Re: Need valves pls
« Reply #7 on: August 22, 2013, 03:35:02 PM »
 YAMAHA VALVE XS750 - XS850 - XS1100 Inlet   $40.85   
 YAMAHA VALVE XS750 - XS850 - XS1100 Exhaust   $55.13   
from
http://www.bkperformance.com.au
Logged
George Scarfe
Aka Scarfey

1981  Honda CBX 1000 Prolink 6 Cylinder
2003 BMW R1150 GS
2004 DR 650 Suzuki.

XS1100 GONE TO A BETTER PLACE as has the old Honda Dominator.

Offline BrettS

  • Hero Member
  • *****
  • Posts: 1052
  • Novice bike rider
Re: Need valves pls
« Reply #6 on: August 21, 2013, 08:18:19 PM »
Seems expensive for a few valves, can a machine shop help?
Logged

Offline XSIIE

  • Hero Member
  • *****
  • Posts: 963
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and email me your postal details so I can send you our group stickers etc.
Re: Need valves pls
« Reply #5 on: August 21, 2013, 12:27:13 PM »
Check out eBay. co.uk or eBay.de
Logged
"If we do what we always do then
we will never be more than we are"
Poh (Kungfoo Panda).
78E x 2
78E DJP Chair
80G (current project)
81H
81RH x 4
82P x 2

Offline HMC

  • Ethics Chairman
  • Full Member
  • ***
  • Posts: 78
  • Gender: Male
Re: Need valves pls
« Reply #4 on: August 21, 2013, 09:14:03 AM »
Hi Eddy          Yes I did see those and they look great. Its $400 for performance valves or $500 for a head. Still reckon there must be  some more standard valves out there as I got the last two for $22 each. I have already spent plenty on the head I have, so will keep searching and fork out the $400 as a last resort.
Logged
Sonium et sonium
79XSF 
R1100GS  
WR450
Kawa 65ZV2

Offline XSIIE

  • Hero Member
  • *****
  • Posts: 963
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and email me your postal details so I can send you our group stickers etc.
Re: Need valves pls
« Reply #3 on: August 20, 2013, 04:59:08 PM »
Logged
"If we do what we always do then
we will never be more than we are"
Poh (Kungfoo Panda).
78E x 2
78E DJP Chair
80G (current project)
81H
81RH x 4
82P x 2

Offline HMC

  • Ethics Chairman
  • Full Member
  • ***
  • Posts: 78
  • Gender: Male
Re: Need valves pls
« Reply #2 on: August 20, 2013, 01:22:06 PM »
I cant find any inlet valves. There is a complete head in the states for $300 plus shipping. I think I may go this way in the absence of any better ideas.Will need to confirm if it matches. 
Logged
Sonium et sonium
79XSF 
R1100GS  
WR450
Kawa 65ZV2

Offline HMC

  • Ethics Chairman
  • Full Member
  • ***
  • Posts: 78
  • Gender: Male
Need valves pls
« Reply #1 on: August 15, 2013, 09:24:22 AM »
Hi All
I started by replacing a head gasket and have bent 5 valves.
Its the 1980 1100 from "shaving the head" string.
I bought some valves from ebay germany but they dont have any more stock.
I cant work out if I bent them on start up as the carbs were stuck open and it blew out to 5k revs before I could shut it down.
Or would it still run being a tooth out on the cam chain? I cant see any contact marks on the valves or the pistons.
The machine shop replaced the valve stem seals when they shaved the head so they should have been straight when they put them back in.
Anyway - stiff shit - I now need more valves so would appreciate a source. I need 3 inlets and 1 exhaust.
I took the head back to the shop and got the valve seats machined as they were pitted and I could not quite lap it out.
I have to take any new valves back to the shop and get them "adjusted" so I am in the same ballpark with the shims.
We are going to get vic club rego for it if successful.               On it goes                   
Logged
Sonium et sonium
79XSF 
R1100GS  
WR450
Kawa 65ZV2
Pages: 1   Go Up
« previous next »