Front/Rear Turn Signal

[excess.11]

I have some of those from yambits i could sell.......new and unused.
PM me if interested.

[makzy]

YAMBITS is the seller, cost me GDP71.80

[makzy]

I just bought 4 new ones to suite standard,s  out of england off ebay, cost about $24 each i think plus postage, don,t know how to do the click thing but you should be able to find them, there was about 10 of them.

[Eveready1100]

Yes, mate. The early model had running lights in the front indicators, hence the two wires going to them. The rears are just the normal single wire setup. Does your bikes wiring have two wires (one active and one earth) going to the indicators or have you (as I found out) have one live, switched through the ignition, plus a live activated by the indicator switch?

At a pinch, you could just use the single wire ones on the front even if you have the running light harness. Just identify which feed wire does what, then hook up the one from the indicator switch. Both types of lights are earthed through the body.

[lumox]

Need to buy front and rear turn signals XS1100E. Have searched EBay and various suppliers, my question is? Whilst searching I have come across turn signals with two wires and some with a signal wire, is one for the front and one for the rear? or does it matter at all?

One step closer to completing the project
Unable to compare with the ones I had as they were thrown away some 15 years ago.
Many thanks in advance.