XS1100 AUSTRALIA
XS1100 Topics => Workshop => Topic started by: Edgey on January 29, 2013, 06:06:31 PM
-
Hi All,
I'm about to order some new fork seals and thought I'd check before hitting the 'pay now' button. Are these the right ones for my 1980G?
http://www.pyramidparts.com.au/products/motorcycle-fork-oil-seals-37x49x8-ref-fos-010-ari-050 (http://www.pyramidparts.com.au/products/motorcycle-fork-oil-seals-37x49x8-ref-fos-010-ari-050)
I've seen them listed on eBay from the US and imagine I would need to specify model and measurment to make sure they don't send me seals for the US special.
http://www.ebay.com.au/itm/Yamaha-XS1100-1978-1979-1980-1981-Models-XS-Fork-Seals-/390159178855?pt=AU_Motorcycle_Parts_Accessories&hash=item5ad74c9c67
Also, any feedback on the Pyramids Parts seals would be great. Are they okay, or am I better off paying $25 each for the genuine seals vs. $12.50 plus postage for these ones?
Cheers,
Edgey.
-
Hi Jarrad. The ones listed in the first link state that they are the correct size for your G model Standard. If buying from that Australian seller in the second link, have him confirm that they are the same ones as in the first link as they are known to be quite oblivious to the differences between the XS models.
As far as the seal quality goes, I ran some of those pyramid seals while I had the standard forks fitted to my Special. Didn't show any signs of leakage in the 2 years I had them on the bike, so in my experience they're ok.
Can't vouch that they would last as long as the OEM's though.
-
Cool, thanks for the good advice Ev. Reckon I'll give the Pyramid seals a go then.
-
Jarrad,
If you haven't already hit the buy button you could get them at your local bearing shop like SKF or CBC etc they usually carry nearly as many seals as they do bearings. just take the dimensions 37 X 49 X 8mm with you and they'll probly have one on the shelf maybe 2 even
-
It'll be interesting to see if you get a result from either of those firms.
Some time ago, I sourced the rear diff seal (70x80x10 from memory) from Bundaberg bearing service and after finding out that they only cost $2.80 each, I got a couple, plus one more for Geoff while I was in there. Then geoff suggested I see whether I could get fork seals, so back i went and discovered they had no listings for either the 37 X 49 X 8mm, or 37x48x10mm to fit the Special \ RH's
So hope you have better luck down your end.
-
Thanks Ev
I took it for a common size, might ring my local SKF shop and see what they've got.
-
I thought so too, in particular the ones for my Special which are the same as early Goldwings and several Honda dirtbikes.
Just not in widespread use in the industrial world, I guess.
-
I just gave my local bearing shops a try - always like to support local business if possible.
No luck with CBC bearings or another mob nearby who stock SKF. Looks like it's back to the online option. Worth a try though - thanks for the suggestion Jonesy.
-
http://www.pyramidparts.com.au/products/yamaha-xs-1100-1980-fork-oil-seals?model=
-
At the risk of teaching you how to suck eggs, the fol may be useful:
http://www.xjbikes.com/Forums/viewtopic/t=8355/highlight=fork+seal.html
Another source for your seals (incl the 3 lipped variety) although postage will probably put you off (unless you are ordering other stuff from Len!
http://www.xjbikes.com/Forums/viewtopic/t=14561/postdays=0/postorder=asc/start=45.html
-
http://www.pyramidparts.com.au/search?q=Yamaha%2F1980%2fXS%201100+Steering%20Head%20Bearings&dd=1