« previous next »
Pages: 1   Go Down

Author Topic: Wiring probs may still be "Looming!"  (Read 5789 times)

0 Members and 1 Guest are viewing this topic.

Offline Eveready1100

  • Have Bike, Will Ride.
  • Hero Member
  • *****
  • Posts: 1822
  • Gender: Male
  • Childers , QLD
Re: Wiring probs may still be "Looming!"
« Reply #15 on: February 18, 2011, 09:21:41 PM »
This was the main reason for my harness change on my Special. Too many bullet connectors squeezed into the headlight shell for my liking.



I was horrified when I found this mess compared to how neat and tidy the rest of the bike was.
Hopefully, you're not dealing with a rats nest like this Brian.
Logged
Errol
1979 XS1100 SF Special
1978 XS1100E Donor
"I know stuff about stuff."

Offline AussiXS11G

  • Administrator
  • Hero Member
  • *****
  • Posts: 1453
  • Gender: Male
  • mmmmmm XS1100
Re: Wiring probs may still be "Looming!"
« Reply #14 on: February 18, 2011, 04:23:07 PM »
I too am a massive fan of the spoke wheels ..... love your work Shaps
 ;D ;D ;D
I have recently chased down a lost tail light through the loom and
the result led me to separate and clean all plugs, and connections
that i could easily do ....
12 volt system apparently needs no "dry joints" so my auto leccie mate tells me
all is well with my electrics now
« Last Edit: February 18, 2011, 04:31:00 PM by AussiXS11G »
Logged
Bryan
Mobile 0404 540 617
1998 Laverda 750S
1984 Laverda RGS 1000
1980 Yamaha XS11
1980 XS1100 outfit
http://s578.photobucket.com/home/aussixs11G/allalbums
http://www.youtube.com/results?search_query=aussixs11g&aq=f

Offline petejw1966

  • Hero Member
  • *****
  • Posts: 699
  • Gender: Male
Re: Wiring probs may still be "Looming!"
« Reply #13 on: February 18, 2011, 10:42:55 AM »
+1 on shapps bike,
its one of the most beautiful xs's ive seen,
the way yamaha should have built it. 
and those spoke wheels.... :P
Logged
Peter
suzuki 2008 hayabusa gen2


former owner
1981 XS1100RH

Offline melbxs

  • Melbourne '81 RH
  • Hero Member
  • *****
  • Posts: 749
  • Gender: Male
  • Brian - 1981 XS1100RH
    • XS1100RH Gallery
Re: Wiring probs may still be "Looming!"
« Reply #12 on: February 17, 2011, 10:19:39 PM »
Logged

Offline melbxs

  • Melbourne '81 RH
  • Hero Member
  • *****
  • Posts: 749
  • Gender: Male
  • Brian - 1981 XS1100RH
    • XS1100RH Gallery
Re: Wiring probs may still be "Looming!"
« Reply #11 on: February 17, 2011, 10:13:02 PM »
Quote from: excess.11 on February 17, 2011, 07:41:18 PM
Now ..."THATS"....a wiring schematic!!!...........very nice work Brian.Im sure a few other people will make good use of that. :P :P :P

I didn't do it. Shappers on the UK site did it.

He own the nicest non-standard XS in the world IMO. Close to standard Sport (RH), but with wire wheels and a full BSM 4-2 exhaust, fuel injection, blue spot calipers etc.


Logged

Offline excess.11

  • Jeff
  • Hero Member
  • *****
  • Posts: 1875
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and PM me your postal details so I can send you our group stickers etc.
Re: Wiring probs may still be "Looming!"
« Reply #10 on: February 17, 2011, 07:41:18 PM »
Now ..."THATS"....a wiring schematic!!!...........very nice work Brian.Im sure a few other people will make good use of that. :P :P :P
Logged

Offline melbxs

  • Melbourne '81 RH
  • Hero Member
  • *****
  • Posts: 749
  • Gender: Male
  • Brian - 1981 XS1100RH
    • XS1100RH Gallery
Re: Wiring probs may still be "Looming!"
« Reply #9 on: February 17, 2011, 06:09:53 PM »
« Last Edit: February 17, 2011, 06:11:38 PM by melbxs »
Logged

Offline melbxs

  • Melbourne '81 RH
  • Hero Member
  • *****
  • Posts: 749
  • Gender: Male
  • Brian - 1981 XS1100RH
    • XS1100RH Gallery
Re: Wiring probs may still be "Looming!"
« Reply #8 on: February 17, 2011, 05:48:58 PM »
Male and it was coming from the indicator. It went to a 4 way that had 2 wires going into it including the one that caused the problem.
Logged

Offline excess.11

  • Jeff
  • Hero Member
  • *****
  • Posts: 1875
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and PM me your postal details so I can send you our group stickers etc.
Re: Wiring probs may still be "Looming!"
« Reply #7 on: February 17, 2011, 05:20:05 PM »
Was the bullet connector........ touching the headlight......... male or female.........and was it coming from the main loom or the indicator ?
Logged

Offline melbxs

  • Melbourne '81 RH
  • Hero Member
  • *****
  • Posts: 749
  • Gender: Male
  • Brian - 1981 XS1100RH
    • XS1100RH Gallery
Re: Wiring probs may still be "Looming!"
« Reply #6 on: February 17, 2011, 05:10:10 PM »
Quote from: excess.11 on February 17, 2011, 05:06:01 PM
This wiring diag shows the fuse block assignment and arrangement in the top right corner.You can see where i m coming from re ...they are seperate fuses and on seperate circuits.
http://members.fortunecity.com/imlucky/fullwire.htm

I looked at something similar earlier and it shows the same thing. I'm going to go out to the shed after dinner and investigate.
Logged

Offline excess.11

  • Jeff
  • Hero Member
  • *****
  • Posts: 1875
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and PM me your postal details so I can send you our group stickers etc.
Re: Wiring probs may still be "Looming!"
« Reply #5 on: February 17, 2011, 05:06:01 PM »
This wiring diag shows the fuse block assignment and arrangement in the top right corner.You can see where i m coming from re ...they are seperate fuses and on seperate circuits.
http://members.fortunecity.com/imlucky/fullwire.htm
One thing i noticed....the horns are on the same fuse as the indicators.
« Last Edit: February 17, 2011, 05:11:38 PM by excess.11 »
Logged

Offline excess.11

  • Jeff
  • Hero Member
  • *****
  • Posts: 1875
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and PM me your postal details so I can send you our group stickers etc.
Re: Wiring probs may still be "Looming!"
« Reply #4 on: February 17, 2011, 04:30:38 PM »
To see if the problem with the indicator shorting to the head light is associated with the start/running probs.....pull the fuse for the indicators (20a) and see if the bike will still start.The ignition should be on a (10a) fuse on its own circuit.
Logged

Offline melbxs

  • Melbourne '81 RH
  • Hero Member
  • *****
  • Posts: 749
  • Gender: Male
  • Brian - 1981 XS1100RH
    • XS1100RH Gallery
Re: Wiring probs may still be "Looming!"
« Reply #3 on: February 17, 2011, 11:17:49 AM »
If you think there's anything I can test let me know.
Logged

Offline melbxs

  • Melbourne '81 RH
  • Hero Member
  • *****
  • Posts: 749
  • Gender: Male
  • Brian - 1981 XS1100RH
    • XS1100RH Gallery
Re: Wiring probs may still be "Looming!"
« Reply #2 on: February 17, 2011, 10:35:56 AM »
My bike is very original and when I got it no-one had ever laid a spanner or screwdriver on it. Not a single chewed up screw head or bolt. The loom is the same - never been touched.

I have since replaced the old fuse box, but that has been all untill i bypassed the killswitch thinking that would solve my problems.  :'( :'(

I also fitted the new horns, but that didn't involve hacking into the loom in any way.

I'll have to dig out a wiring diagram to see what was going on.
Logged

Offline excess.11

  • Jeff
  • Hero Member
  • *****
  • Posts: 1875
  • Gender: Male
  • Welcome to the group. Now let us know a bit about you in General Discussions and PM me your postal details so I can send you our group stickers etc.
Wiring probs may still be "Looming!"
« Reply #1 on: February 17, 2011, 08:10:21 AM »
Thought i d start a new thread in response to Brian s probs..but also to act as information for all our bikes electrical wiring be they differences , problems , fixes or otherwise.
Regarding your probs Brian.......a couple of quick thoughts came up with the question.......are your probs still fixed? The main loom in general has an insulated sleeve over a "Female " bullet connector.The "Male " bulllet would have come from the indicator itself..............therefore being a dead wire to negative ......ie...... the headlight shell.On the suject of blown fuses , as a result of this....the indicator is on  a seperate fuse to the ignition.Soooo........if this shorted the indicator fuse i would think the ignition circuit would still function.When i look at my xs1100e fuse block ..from left to right.the fuse assignment is..........1)Main(30a)....2)Head(10a)...                    3)Turn(20a).......4)Ign(10a)  .Some wiring may be astray if the ignition and indicators are on the same fuse..........and this may be your problem ,too much load on the one fuse.As i said ......just a few thoughts.........and as i m expecting.......i think i just opened up "a whole can of whoop ass!!!
Logged
Pages: 1   Go Up
« previous next »