air mixture screws

[steptoe]

on the road atm, will get back to you when at home

[Jonesy :-)]

Thanks again willcr15 Sirius has the right one

[willrcr15]

Have a look here  http://www.siriusconinc.com/search_result.php?search=search&make=2&model=xs1100&part=1&partno=&x=44&y=8

[Jonesy :-)]

Thanks willcr15 i had a look at the link to mikesxs but none of the screw im after.

Steptoe can you see the photo yet?
I know you have a carby kit supplier, who is that and what part number?
Not sure if mine are 34 or 36's there tin tops not alloy.

[willrcr15]

Have a look here & you'll find the right screw's & kits.
https://www.mikesxs.net/xs750-xs850-xs1100/fuel-system.html
Also CMSNL can help work out whats what a bit.
Weve just been through the jetting  to get it all back to standard, somewhere to start at least.
I think we used Keyster as a pic guide as well & we bought jets from Ian Williams Tuning at sensible prices & had them next day in NSW.

[steptoe]

cant see a picture, but there,s pretty much only the 2 screws,, across all the range of bs 34,s and 36,s

[Jonesy :-)]

These are from the recently acquired roundy.
the one on the left was jammed into No:1 with a stripped screwdriver slot.
the one on the right is an ok one from another carb body
the middle is from a repair kit. but its obviously very different. Thought i could cut the head off and put in a screw driver slot, but the thread is also a bigger diameter. the rest of the repair kit is ok like correct gasket and other parts. just the mixture screw is wrong.

Can anyone tell me what specific model part# I should belooking for as a replacement?